Dusty Divot (Fortnite Battle Royale) – Polymer Clay Tutorial

Dusty Divot (Fortnite Battle Royale) – Polymer Clay Tutorial


Hey guys and welcome to another polymer clay tutorial today, we are finally creating dusty divot from fortnite There is so much work ahead of us, I’m really excited about this tutorial about all the creative clay stuff We are going to do in this tutorial and you decided in one of the last polls that I should create Dusty divot as the next location from fortnite I think it was right after my tilted towers tutorial. Yeah. This plate is too small. (hehe) I think uh. Well, we need a bigger Underlay for oven hardening. So I start right away with this wooden plank And I’m just drawing a tiny outline so that I know where to put all the clay this is a lot of brown clay and this will be the base layer for the filling for the inside area of the crater so make a thin layer of this brown clay, and I’m always using The printed map of dusty divot it is not really high-resolution. It is the one from Epic games I found it right away. I printed it out and for most of the other reference pictures and images I used for this tutorial Well, I also googled them But I also played the game on my switch to get some really good images, but you will see that in a minute for now, let’s catch the Real crater shape. So let’s get it into shape and we can start with a modeling tool And this was really fun to create Try to get this typical texture from a crater from the inside It really should look like as if the earth Was injured and it has moved a lot due to the comet Which has landed on to dusty deep? Oh Yeah, I’m using some brighter brown clay in order to get an even greater texture and I wasn’t Really sure what I was creating. We’re creating I just went crazy with a modeling tool and I highly recommend that you do the same So when you are creating organic forms or organic organic Textures don’t think too much about it just start moving the modeling tool and it looks great in any way and there’s always the important part of coincidence of Accidents which are happening while creating and which make the creation really alive Now that we finished creating with brown clay We are switching over to a lot of green clay and I didn’t try to Mix it too strong in order to have a nice green pattern inside. This will be all for the grass So I try to get the outline I just made with my ruler And it fits almost perfectly take a scalpel or any knife and Start to cut the clay to get the real shape of course, you can also create it a bit bigger or a tiny bit smaller But I thought this would be the perfect powered the perfect shape to get even the two mountains the crater and the The Dipper the destroyed the pose on to it. So this is why I went with this big shape Now there is some even more clay right under the green clay in order to get the edges Stick a bit to the air and now you can fill in the crater We just created and it already looks fascinating You’ve seen this image on my Instagram account. I think I have never gotten so many lights on one of the images I ever post it but somehow you you liked the making of the crater and it really looks interesting and amazing all these Patterns which appeared Now some occur gray and brown gives as this color For the first mountain I try to get the shape as Near as the original one This will be the second layer of this mountain and I used my scissors To get really hard edges on the rock on the stone part and even some more Extra work with a modeling tool Now all we have to do is to cover it with green grass So just put it on top a very very thin layer of green clay. It’s really like painting It really is. It’s like painting An oily oil painting a Scenery, so this will be the second mountain on the right side Maybe you should create this one a bit higher I think I failed while creating because in the final version you see that I Put a tree right next to it and the tree is almost as almost the same height then this mountain this isn’t As it is supposed to be on the real some more promptly in the middle and this will be the part where all the containers and laboratories will be But first we will finish the crater first, of course This is the way and there are some bright spots right on this place in the middle and I try to get this color By using brown and some occur. Yeah So now will you also create these tiny damages to the landscape? These are also very very tiny comets Apart from the bigger comet which just landed on the grass and There are even some more spots and the backside of our tiny dusty divots met and What creating something really stupid happened to me? I started with the images as reference material which with the ones I found on Google and You may think that These images were the correct ones But they weren’t there was a new patch released I think at the beginning of June and now there are even some trees inside the crater and there’s Some changes also made to the buildings on the place in the middle This is my toothbrush I’m always using for a Sun grass texture Well, and so I missed all the new details all the changes which were currently made to the map but I decided afterwards that I would include all the changes and This is why you don’t see grass in the middle of the crater right now But I will edit later after oven hardening when I found out about it I was playing for a night on my switch Yep. So this is some silver clay and some black and brown for all these tiny tiny pieces of the comet and it looks a bit like sprinkles All over the place very very tiny ones. I think it were like 20 25 of them So very easy to create just take a needle to place them. That’s it Now this is the broken Depot and the broken street and if you are using a knife or a scalpel it even looks like as if the street was cracked open yeah, some more tiny tiny pieces of brown clay and we are ready to go into the oven but meanwhile We can already start creating Deppoh so this will be the first building of the first part. We will be focusing on and It has this typical brick color. So I used this Color without mixing if you don’t have this brick brick II color You just take some red and brown and you get nearly the same color So also the gray building and if you want to go easy You just cover it with a very thin layer of silver clay and you’re done. But if you want to do the difficult way I Try to show you how to create even more details you Just cut the buildings into pieces to glue them to assemble them after oven hardening so this will be the roof and We can even create The windows now that we decided to go the difficult way and this will be the doors opening spots and also the opening mechanism of the gate and Now the great pieces as well. The the gray Depot is even more destroyed So just make sure to include all these tiny damages. I Used is some very thin wire to show some inside parts of the building It really should look like as if the building was cracked open and was destroyed And I think with not so much work. It looks really nice. So these are all the tiny Containers which are falling out. This was a tiny truck which will be located right next to the depots and Now we will focus on the most difficult part because there are so many Things to think about and not to forget all the tiny details like the helicopter Hold the trucks and also this part changed after the last update of dusty depo I think the Helicopter changed the direction it was pointing to So this is the big guy. This is the comet or Headley is The huge rock which is left of the huge comet and we will place it Right into the building and I’m using this paperclip as a placeholder and now it looks like The building before the update without the roof But as I already told you we will create the roof and the version Which is in the game right now? some are very thin wire or the Spotlights and I created four of them, but I’m not really sure about that guys I think only three of them are used because the roar of the one right next to the helicopter was destroyed But again, I’m not sure about that. Maybe you can leave it in the comments if you know if there are three or four spotlights so now that the buildings are finished we can focus on all the trees and Go crazy again That it looks nice it’s the same technique I use for all the buildings on the Tilted towers tutorial Yeah, so there are basically two types of trees there are pine trees in two different colors and also these Leave trees are they called leaf trees? Yeah, so again the toothbrush get a nice surface for all of these tiny trees and Some more details for the pine trees and of course we need some more of them There are three Hut’s tiny. Tiny hats on my part of the dusty divot map So don’t forget to create these as well and now some more phrase This is a bit darker color of one of the pine trees this will be for the tree trunks and this is The roof the roof of the main building of the leopard laboratory, sorry laboratory laboratory Yeah, this is my switch I used these images so I tried to get as near as possible I should have created this map way bigger. It would have been way more work, but It would have also been more accurate So this is the last working step all the trees inside the crater and we are ready to go to the oven Freshly baked part of the dusty divot map and It worked pretty great to work on the the wooden plank now, I’m taking some acrylic colour Two different kinds of green some yellow and two types of brown to get the same color of the grass spots in Thai inside the crater and Just place it inside don’t be too. Shy to create with a to paint with your brush Again, there are some accidents happening and they look always great Yeah Now the fun part starts We are assembling the demos. I’m starting with the one behind And using my super glue for that It’s very fast trying be careful with this type of glue. I Really? Hope that would be another a different solution To use a different clay because it happened a lot that I glued my fingers together and it really hurts So this is the second dip. Oh Just flipping away That it has almost the same height again This bullying is supposed to look really destroyed. It should really look like a mess and This is why all the containers Fall out of the depo and we are gluing them into the crater as well and I used this paper cutout to get the Correct the right position for all the buildings and now we can glue all these pieces after drawing, I Decided to go with this pattern on the roof Because it looks more typical Like the real one and we will glue the tiny crater over the tiny comment Sorry inside this lavatory So this is the pipe the pipe connection to one of the smaller buildings and I’m also using the pen for the drawing on the roof and the two towers and We can place the vehicles there are different trucks I Think there are three three trucks and three of our tiny cars Maybe I also have forgotten one of the cars. I’m not sure about that Yeah, but this is the most characteristic vehicle which should should be included the helicopter and I tried to it is broken after the update. So it is Not too bad that it looks a bit destroyed ha So this was the last piece of the building and the last truck will be glued inside this area and Yeah, just removing the placeholder and Gluing the roof onto the comets Now placing the last truck on the way on the way to the laboratory And these will be the spotlights and they have changed as well first They were white now. They are red or maybe it is Depending on the time of day. I’m not sure about that Gluing them right into the corners and it’s always helpful to use a needle If you are working with a lot of wire So it makes it way more easy to glue it into position This was one of the most difficult parts first I thought about creating these walls from clay but then I thought it would be too thick and I went with paper so These will be the walls and we will glue them right Where they should be As an outline for this aerial and it already looks Fascinating and you’re thinking about where to land This is the broken nice track. I didn’t forgot that one Now we can start gluing all the trees onto our map. This will be the last working step of this tutorial This is the biggest tree using a pen to hold it in position and there’s another track in the back side and some more pine trees as well and Even some more ones on the hill With a trunk as well Yeah, I read a lot of these comments, which said I really should create the whole map from fortnight I’m really sorry. I won’t do that. It’s just too much work I don’t think that I’m I’m capable of doing this But this will be not the last piece of map I will create I’m really looking forward to the next season and I think there will be some big Changes to the map as well and as soon as they are Or the new season is released. Let me know in the comments I’m always reading them. So that I can react quite fast and create the next part of the map or even a new part of new map Polly knows Some are tree trunks for the aerial inside the crater this was also, very tricky to create Because now the last working step we have to place all these tiny leaves These tiny trees onto the trunks and it already looks so Fascinating like a landscape from a model train Chasing the last tree and guys, I guess finally that’s it dusty devil What a huge tutorial what a huge creation, I hope you enjoyed this tutorial Please let me know what you think and which location you would want to see next write down in the comments now I can play not only with a dusty limit but Also till two towers Here you see the size comparison, which is just crazy Does he live it is so huge I guess so that’s it for today. Thanks a lot for watching. Take care Have a great weekend and see you soon. Bye, Subscribe To DemonJoBob For Fortnite Videos This was a lot of work

100 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *